"Index of /admin"
"Index of /password"
"Index of /mail"
"Index of /" +passwd
"Index of /" +password.txt
"Index of /" +.htaccess
index of ftp +.mdb allinurl:/cgi-bin/ +mailto
administrators.pwd.index
authors.pwd.index
service.pwd.index
filetype:config web
gobal.asax index
allintitle: "index of/admin"
allintitle: "index of/root"
allintitle: sensitive filetype:doc
allintitle: restricted filetype :mail
allintitle: restricted filetype:doc site:gov
inurlasswd filetype:txt
inurl:admin filetype:db
inurl:iisadmin
inurl:"auth_user_file.txt"
inurl:"wwwroot/*."
top secret site:mil
confidential site:mil
allinurl: winnt/system32/ (get cmd.exe)
allinurl:/bash_history
intitle:"Index of" .sh_history
intitle:"Index of" .bash_history
intitle:"index of" passwd
intitle:"index of" people.lst
intitle:"index of" pwd.db
intitle:"index of" etc/shadow
intitle:"index of" spwd
intitle:"index of" master.passwd
intitle:"index of" htpasswd
intitle:"index of" members OR accounts
intitle:"index of" user_carts OR user_cart
USE VISUAL DEVELOPER 2005 EXPRESS EDITION if u don't have VS2005..
only 40MB...
DOWNLOAD VS2005 EXPRESS 40MB
Download Now! ASP.NETLAB1
R1,R2,R3--------------
Router(config)#hostname R1
Enable Secret Password:
Router(config)#enable secret class
Configure a password of cisco :R1,R2,R3
R3(config)#line console 0
R3(config-line)#password cisco
R3(config-line)#login
Configure a password of cisco for vty connections. R1,R2,R3
R1(config)#line vty 0 4
R1(config-line)#password cisco
R1(config-line)#login
Enable OSPF using process ID 1 on all routers for all networks:
R2(config)#router ospf 1
R2(config-router)#network 192.168.20.0 0.0.0.255 area 0
R2(config-router)#network 10.1.1.0 0.0.0.3 area 0
R2(config-router)#network 10.2.2.0 0.0.0.3 area 0
R1(config)#router ospf 1
R1(config-router)#network 192.168.10.0 0.0.0.255 area 0
R1(config-router)#network 192.168.11.0 0.0.0.255 area 0
R1(config-router)#network 10.1.1.0 0.0.0.3 area 0
R2(config-router)#network 209.165.200.0 0.0.0.3 area 0
R1(config)#router ospf 1
R1(config-router)#network 192.168.10.0 0.0.0.255 area 0
R1(config-router)#network 192.168.11.0 0.0.0.255 area 0
R1(config-router)#network 10.1.1.0 0.0.0.3 area 0
Configure a loopback interface on R2.
R2(config)#interface lo 0
R2(config-if)#ip address 209.165.200.225 255.255.255.224
R2(config-if)#no shutdown
Configure IP addresses for the VLAN 1 interface on each switch.
Switch 1:
Switch(config)#interface vlan 1
Switch(config-if)#ip address 192.168.10.2 255.255.255.0
Switch 2:
Switch(config)#interface vlan 1
Switch(config-if)#ip address 192.168.11.2 255.255.255.0
Switch 3:
Switch(config)#interface vlan 1
Switch(config-if)#ip address 192.168.30.2 255.255.255.0
Configure each switch with the appropriate default gateway.
Switch 1:
Switch(config)#ip default-gateway 192.168.10.1
Switch 2:
Switch(config)#ip default-gateway 192.168.11.1
Switch 3:
Switch(config)#ip default-gateway 192.168.30.1
Task 2: Configuring a Standard ACL
R1(config)#ip access-list standard std-1
R1(config-std-nacl)#deny 192.168.11.0 0.0.0.255
R1(config)#interface fastEthernet 1/0
R1(config-if)#ip access-group std-1 in
Task 4:
R2(config)#ip access-list standard task-4
R2(config-std-nacl)#permit 10.2.2.0 0.0.0.3
R2(config-std-nacl)#permit 192.168.30.0 0.0.0.255
R2(config-std-nacl)#deny any
R2(config)#line vty 0 4
R2(config-line)#access-class task-4 in
R1#telnet 10.1.1.2
LAB 11 -- ACL 2
Task 1:
Task 2:
Router(config)#hostname R1
To disable DNS Lookup-(to search unknown command takes more time to disable searching)
R1(config)#no ip domain-lookup
Setting banner for the router:
R1(config)#banner motd #
Enter TEXT message. End with the character '#'.
Hirushan's router 1 #
R1(config)#
--Router 1,2,3
R1(config)#line vty 0 4
R1(config-line)#password cisco
R1(config-line)#exit
R1(config)#enable password class
Pc1---Telnet
PC>telnet 10.1.1.254
Trying 10.1.1.254 ...
Hirushan's router 1
User Access Verification
Password: cisco
R1>enable
Password: class
R1#
--TElnet pc 1 to Router 2
PC>telnet 10.1.0.2
Trying 10.1.0.2 ...
User Access Verification
Password:
-telnet pc 1 to Router 3
PC>telnet 10.3.0.2
Trying 10.3.0.2 ...
User Access Verification
Password:
R1(config)#ip access-list standard hirushan
R1(config-std-nacl)#permit 10.1.0.0 0.0.0.255
R1(config)#interface fastEthernet 0/0
R1(config-if)#line vty 0 4
R1(config-line)#ip access-class hirusahn in
Check connectivity:
PC>telnet 10.3.1.1
Trying 10.3.1.1 ...
% Connection refused by remote host
R2(config)#access-list 101 deny tcp 10.1.1.0 0.0.0.255 10.3.1.0 0.0.0.255 eq telnet
R2(config)#access-list 101 permit ip any any
R2(config)#access-list 101 permit icmp any 10.1.0.2 0.0.0.0
R2(config)#access-list 101 permit tcp any any eq 80
R2(config-if)#ip access-group 101 in
Lab13-DCCN
HeadQ-
Router(config-if)#encapsulation frame-relay
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#interface serial 1/0.102 point-to-point
Router(config-subif)#ip address 192.168.102.1 255.255.255.0
Router(config-subif)#frame-relay interface-dlci 102
For other routers-Use main interface
Router(config)#interface serial 1/0
Router(config-if)#encapsulation frame-relay
Router(config-if)#ip address 192.168.103.2 255.255.255.0
Router(config-if)#frame-relay interface-dlci 301
FrameRelay-
Ser0- DLCI-102 Head to Kandy
DLCI-103 Head to Galle
Ser 1-DLCI-201 Kandy To HeadQ
Ser 2 -DLCI-301 Galle to HeadQ
kandy
Router(config)#router eigrp 1
Router(config-router)#network 200.200.102.0 0.0.0.255
Router(config-router)#network 192.168.102.0 0.0.0.255
HQ-
Router(config)#router eigrp 1
Router(config-router)#network 192.168.102.0 0.0.0.255
Router(config-router)#network 192.168.103.0 0.0.0.255
Router(config-router)#network 10.10.10.0 0.0.0.255
Galle-
Router(config)#router eigrp 1
Router(config-router)#network 192.168.103.0 0.0.0.255
Router(config-router)#network 200.200.103.0 0.0.0.255
Decompiler for Visual Basic writen programs.
VB Decompiler is decompiler for programs (EXE, DLL or OCX) written in Visual Basic 5.0 and 6.0 and disassembler for programs written on .NET technology.
The loss of source codes is a very serious problem for many developers. From my personal experience I can say that it is indeed a terrible misfortune. Imagine you write the program, spend your force, time and money, release compiled program to the customers... But one morning you see that all your sources are gone (it may be your cat, or aliens. Who knows?) You are in panic. What should you do? Tear one's hair? There is no need. Just take the VB Decompiler and simply decompile your project! VB Decompiler restores the source code from the pseudo code (P-Code) as close as possible to the original. So, after some modifications you may get really workable source code.
But you ask: what if the program is compiled not to interpreted P-Code, but in assembler Native Code? In this case, of course, you can't get fully compilable source code. But there is no need for disappointment. VB Decompiler has a built-in powerful disassembler and emulator commands to the extent possible to bring the assembly code to the original. Of course because of the diversity of modern methods of optimization and protection code, the process is not always ideal, but in this situation, VB Decompiler really helps you in the software analysis and reverse engineering.
And what if you develop in Visual Studio, using .NET Framework?
For our decompiler it's not a problem! VB Decompiler can easily restore the structure from the tables of the assembly, and will be useful for disassembly and analysis of IL code. Our decompiler does not require .NET Framework. It works fine in any 32-bit Windows operating systems and does not require installing additional software.
As you can see VB Decompiler is an ideal tool for analyzing and restoring the source code. VB Decompiler is a "must-have" tool for VB-developers, who appreciates their work, time and money.
Minimum System Requirements: Pentium 166, 32Mb RAM, Windows 95/98/ME/2k/XP/2003/Vista.
Homepage and more info here:
Code:
http://www.vb-decompiler.org/
Download Application and Working Patcher from here:
Code:
http://rapidshare.com/files/279100381/VBDecomp76Pro.rar
Archive Password: just4you
sharing your existing ethernet internet connection
1. go to control panel -> network connection.
2. right click on your ethernet connection and click on “properties”.
3. go to “advanced” tab.
4. check “allow other network….. internet connection”
5. in the drop down below select the wifi connection of your pc. if it is disabled, it will be showing your wifi connection already.
6. click on “settings”
7. check the protocols you need to share.i normally use only http and https.
8. click on “ok”.you reach the network connection page. the sharing part is now over.
finding dns server ip address.
1. click on start -> run
2. type in cmd in the run prompt
3. in the new window type “ipconfig /all” and press enter.
4. note down your dns server ip address from the screen.
configuring the wifi
1. go again to control panel -> network connections.
2. right click on your wifi connection and click “properties”.
3. go to”wireless network” tab.
4. the “use windows to configure my wireless network connection” should be checked.
5. in the preferred network connection section click on add button
6. enter a name of your wish to the network name.
7. network authentication is “open”
8. change data encryption to “disabled”
9. check the “this is a computer to computer …. not used” connection.
10. click “ok”.
11. click on general tab. select “internet protocol(tcp/ip) and click on properties button.
12. now type 192.168.0.1 in ip address, 255.255.255.0 in subnet mask, leave default gateway empty.
13. fill in the dns server entry which you had noted down earlier.
14. click on “ok” and your network is set.
your network should appear on the wifi network list now. search for wlan on your phone. connect and enjoy browsing on your phone.
Thanks....................
